Effect of Ladle Changeover Condition on Transient Three-Phase Flow in a Five-Strand Bloom Casting Tundish

Metallurgical and Materials Transactions B - The transient three-phase flow behavior in a five-strand bloom casting tundish during the ladle changeover process considering a constant casting speed...     

结合细粒度特征与深度卷积网络的手绘图检索

目的 传统的手绘图像检索方法主要集中在检索相同类别的图像，忽略了手绘图像的细粒度特征。对此，提出了一种新的结合细粒度特征与深度卷积网络的手绘图像检索方法，既注重通过深度跨域实现整体匹配，也实现细粒度细节匹配。方法 首先构建多通道混合卷积神经网络，对手绘图像和自然图像分别进行不同的处理；其次通过在网络中加入注意力模型来获取细粒度特征；最后将粗细特征融合，进行相似性度量，得到检索结果。结果 在不同的数据库上进行实验，与传统的尺度不变特征（SIFT）、方向梯度直方图（HOG）和深度手绘模型Deep SaN（sketch-a-net）、Deep 3DS（sketch）、Deep TSN（triplet sketch net）等5种基准方法进行比较，选取了Top-1和Top-10，在鞋子数据集上，本文方法Top-1正确率提升了12%，在椅子数据集上，本文方法Top-1正确率提升了11%，Top-10提升了3%，与传统的手绘检索方法相比，本文方法得到了更高的准确率。在实验中，本文方法通过手绘图像能在第1幅检索出绝大多数的目标图像，达到了实例级别手绘检索的目的。结论 提出了一种新的手绘图像检索方法，为手绘图像和自然图像的跨域检索提供了一种新思路，进行实例级别的手绘检索，与原有的方法相比，检索精度得到明显提升，证明了本文方法的可行性。     

基于振动实测的非均质地层钻头失效分析与对策

四川盆地作为国内页岩气开发的重点区域,通过近几年的不断攻关和实践,机械钻速得到了提高,但由于受地层复杂、可钻性差、非均质性强等地质因素的影响,导致井下钻柱系统不良振动剧烈,容易出现钻头损坏严重、钻速较低等问题,严重影响了钻井时效。为了解决上述难题,以该盆地涪陵工区上二叠统龙潭组—中二叠统茅口组为例,采用井下振动高频测量工具的实测手段,测量了钻头—钻柱系统的动态振动加速度参数,结合地层的岩性和矿物组分分析,研究钻头失效原因与对策,并开展了现场试验。研究结果表明:①在非均质地层中钻进的钻头—钻柱系统产生了大于40 m/s~2的高幅值瞬时冲击振动,高幅值的瞬时冲击是导致钻头先期失效的主要原因;②提出了抑制高幅值的瞬时冲击振动采用"减振+增压"工具组合和避免井下工具共振的钻井参数;③采用钻井新参数的试验井比邻井的高幅值瞬时振动降低了17%,单只钻头进尺增加24%,钻头工作环境得到了较大的改善,钻头使用数量减少。结论认为,该研究成果能够有效地改善钻头—钻柱系统的振动状态,有利于达成延长钻头使用寿命的目标。     

Confined Transformation of UiO‐66 Nanocrystals to Yttria‐Stabilized Zirconia with Hierarchical Pore Structures for Catalytic Applications

Solid acids as a substitution for hazardous liquid acids (e.g., HF and H₂SO₄) can promote many important reactions in the industry, such as carbon cracking, to proceed in a more sustainable way. Starting from a zirconium‐based metal‐organic framework (UiO‐66 nanocrystals), herein a transformative method is reported to prepare micro/mesoporous yttria‐stabilized zirconia (YSZ) encapsulated inside a mesoporous silica shell. It is then further demonstrated that the resultant reactor‐like catalysts can be used for a wide range of catalytic reactions. The acidity of the YSZ phase is found with rich accessible Lewis acid and Brønsted acid sites and they display superior performances for esterification (acetic acid and ethanol) and Friedel‐Crafts alkylation (benzylation of toluene). After being loaded with different noble metals, furthermore, hydrogenation of CO₂ and a one‐pot cascade reaction (nitrobenzene and benzaldehyde to N‐benzylaniline) are used as model reactions to prove the versatility and stability of catalysts. Based on the findings of this work, it is believed that this class of reactor‐like catalysts can meet future challenges in the development of new catalyst technology for greener heterogeneous catalysis.     

Grain growth behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy during isothermal β heat treatments

Isothermal β heat treatments of Ti-6.5 Al-3.5 Mo-1.5 Zr-0.3 Si alloy were performed at the temperature of1040-1240 ℃ to examine the influence of heating conditions on grain growth of the alloy. The results show that the grain size increases with heating temperature and holding time increasing. Rapid β grain growth of the alloy takes place at the temperature of over 1140 ℃. The grain growth kinetics for the alloy follows the classical isothermal grain growth law.The growth time exponent(n) of 0.5651 and activation energy(Q) of 129.6 kJ mol-1 are determined. Finally, in order to determine the grain size under different heating conditions,the grain growth model of the alloy was established.     

羰基合成高碳醇工艺进展及费托烯烃产品氢甲酰化

开发煤制高碳伯醇技术,对煤炭的清洁利用和国家能源安全有重要意义。煤制油项目的试车成功为羰基合成高碳醇提供了丰富的α-烯烃原料。概述羰基合成催化剂体系的工业发展历程和低压液相循环氢甲酰化工艺生产应用,介绍了费托产品为主要原料制备高碳醇国内外相关的技术发展现状。同时对开发水/有机两相体、氟两相、超临界流体等液/液两相催化体系应用费托的高碳α-烯烃氢甲酰化作了系统阐述,并对其应用前景进行了评价。对打破国外技术壁垒,自主研发高碳醇羰基合成工艺应用费托产品寄予展望。     

The application and prospects of cyclodextrin inclusion complexes and polymers in the food industry: a review

Cyclodextrin is an odorless and tasteless cyclic oligosaccharide widely used in various fields such as food, medicine and the environment. Cyclodextrin can improve solubility and stability, and can mask the bad taste of specific substances. Cyclodextrins and their polymers primarily act by forming complexes in foods, and can be applied in food packing, food analysis, enhancing the properties of antioxidants, antibacterials, for stability and so on. The challenges and opportunities facing this area are reviewed. It is hoped that the review will provide useful information for future applications of cyclodextrin in the food industry. © 2020 Society of Chemical Industry     

多孔道底吹喷枪搅拌的数值模拟与强化机理分析

底吹富氧搅拌是熔池熔炼的一种关键强化技术，对品位低、杂质多的矿产资源具有很好适应性，底吹喷枪是其关键工艺设备。本文将数值模拟与数理统计相结合，建立了多孔道底吹喷枪强化搅拌的三维数学模型，并通过水力学模型实验对数学模型进行了验证。针对模型计算结果，以气泡上升时间、液体的气含率方差和平均湍流强度等为评价标准，对直管及多孔道底吹喷枪搅拌过程的混合均匀度进行对比研究。结果表明：多孔道喷枪喷吹方式在提高熔体搅动能的同时能使中上部熔体的混合更为充分，并在生产实践中取得了良好的应用效果。     

耦合膜分离的新型CO2低温捕集系统性能优化

CO₂捕集作为温室气体排放控制的有效手段已成为重要研究课题。作为新兴捕集技术之一，低温CO₂捕集因产品纯度高、无附加污染等优势受到关注。然而，该技术能耗和捕集率对于气体中CO₂浓度十分敏感，对于高CO₂浓度气体可获得较高的CO₂捕集率和较低能耗水平。基于此，本文提出了耦合膜分离的新型CO₂低温捕集系统，通过膜材料选择渗透性实现待捕集气体CO₂浓度主动调控，并在最优浓度下进行CO₂低温捕集。首先基于不同传统低温捕集系统特点，对比分析了不同耦合系统模式，从而确定了最优耦合系统结构。针对最优耦合系统进行了运行参数优化，并分别基于实现系统捕集能耗最低与捕集率最高的目标，获得了膜渗透侧CO₂浓度与进气CO₂浓度间的关系式，为该耦合系统中膜组件选型提供指导。研究表明，本文提出的耦合系统捕集能耗为1.92MJ/kgCO₂，相比于传统单一低温系统捕集能耗可降低16.5%。     

基于滑模的运载器主动段俯仰通道姿控系统设计

与传统比例-积分-微分（PID）控制方法相比，滑模控制（SMC）方法可以比较容易地将不确定性纳入控制器设计中，从而增强系统的鲁棒性。探索了SMC技术在运载器主动段姿态控制中的工程应用，首先通过分析基于趋近律的SMC系统，提出了降低不连续切换项系数的需求，然后研究了基于干扰上界的SMC方法。三通道小偏差仿真结果验证了两种方法的控制效果，表明第2种控制器的鲁棒性更好，稳态误差小，同时发动机喷管摆角需求较小。